Skip to main content

The Big Degu Cage Build - Part Seven

Made the door frames today with just enough time to cover one of them in mesh. Would have liked a little more done but they were just so incredibly time consuming.

We were originally going to glue and screw the doors but we couldn't figure out a way to drill pilot holes through the butt joint efficiently. Instead, we glued and stapled them with a staple gun you use for upholstery. The seem solid enough as it is and the aluminium trim will help strengthen them even more.

I'm still in the middle of an order of cat and dog paintings for Whitby Galleries and my extra paper arrived this morning so I better crack on with finishing those tomorrow. I'm aiming to get the mesh on the rest of the doors and the inside of the bottom section, back, and sides primed over the weekend.

Comments

Popular posts from this blog

Dozing Degus

I can't believe I've had my degus for a month tomorrow. I've been a little busy with work this past week but I thought I'd take time out to share a little video my brother took of the girls chillaxing on Saturday afternoon. About 30 seconds in I open the door for a better view. Enjoy!

The Big Degu Cage Build - Part Eight

Work on the cage has slowed a little due to other commitments but all four doors have now been meshed and the aluminium angle has been cut to size. The angle will protect the doors from degu teeth and protect them from any sharp bits on the mesh edges. 2 of 4 doors with mesh attached Tomorrow I'm not expecting to get much done other than maybe a coat of paint on the outside as I'm frantically trying to meet a deadline for work. I had hoped my order of cage accessories would arrive today as the website had them sitting in my local delivery hub but it looks like it'll be Monday now. I can't wait to get them! I've ordered: Some wooden bridges and ladders to use as ramps through the cage. A glass water bottle so that I can put it inside rather than through the doors. A 2 storey log cabin for their nest box. A grass hammock which they'll non doubt have chewed in a few hours. A temporary large wooden wheel. I'm hoping to be able to make them a flying ...

DIY Cage Versus the Degu Menace

Every time I open the cage door Myka Degu takes a bite sized chunk out of the edge of the MDF. It's a little bit of an oversight on my part as I didn't think It would need protecting as they can only get at the edge when the door is open. I've left repairing it for as long as possible but the tools had to come out today as it's too bad to ignore any longer. I actually watched her pull a piece off with the door shut!